Energy Saving Ip65 Waterproof Outdoor Road Lamp Integrated All In One Solar Street Light
Characteristics of the solar street light:
1.No need to pull wires, installation is very convenient.
2.Waterproof structure, safe and reliable;
3.Extensible timing, voice control and other functions.
4.Adopt modular design concept to facilitate installation, maintenance and repair.
5.Alloy material is used as the main body of the structure. It has good functions of rust prevention and corrosion prevention
Product Introduction about solar outdoor light:
| Product Name |
LED street light |
| Keyword |
Solar Led Street Light Lamp |
| Color Temperature |
2700K-6500K,RA>70 |
| Brightness |
220LM/W |
| Working Time |
12-15 hours,10-12 cloudy/rainy days |
| Charging Time |
6-8 hours |
| Mounting Caliber |
70-76mm(suggestion) |
| Working Temperature(ºC) |
-25~65 |
| Body Senor(°) |
160 |
| Battery Power Indicators |
100%-75%-50%-25% |
| Fault indicator |
Red/Blue/Green |
| IP Rating/IK Class |
IP66/IK09 |
| Warranty |
3 years/ 5 years |
| Application |
Highway, courtyard, road, outdoor, etc. |
Application/Usage:
Widely used in branch roads, streets, and factory roads, parks, villages, mountainous and remote areas, lighting projects, courtyards, schools, squares and other places that require outdoor lighting, helping domestic traditional lighting to upgrade to LED green new energy lighting Replace.
Our Advantages
1. Smart remote control, equipped with drone remote control, ultra-long remote control distance of 30 meters, can pass through obstacles, and can set four lighting modes at will.
2. High-efficiency LED chips can reach 220LM/W, which is more than twice the average brightness of ordinary LED light sources, with a luminous angle of 140 degrees, and a wider irradiation area.
3. The whole lamp adopts modular minimalist design, easy disassembly, installation, and transportation.
Operation method:
1. How to turn on/off the light?
Solar street light has a magnet power switch, when take away the magnet iron sheet, the light is on; when put the magnet iron sheet on, the light is off. (Before mounting the light on the pole, please take away the magnet iron sheet, the light is lighting on/off automatically by light sensor. )
2. How to use the remote control?
Before using the remote control, make sure the lamp is on (take away the magnet iron sheet).Use the remote control to operate the light. For details, refer to the instruction printed on the remote control cover.
3. If press "DEMO" button, no matter day or night, light "on" for 1 minute, then off.
How to install the device?
1. Dig a hole according to the size of the foundation cage, put the foundation cage into the hole and fix it with concrete.
2. Use the supplied screws to fix the bracket on the lamp.
3. Use the supplied screws to fix the lamp on the pole.
4.Lift the lamp pole by the person or machine,align the bottom flange of the lamp pole with the foundation cage, and then fix the lamp pole with screws.
Attention:
1.Please Charge All Model of light (without discharge at night) for 3 days before installing;
2.Please notice to install the light to the place without any shade and
better face to south to get good sunlight for charging.
3. Please remove the plastic isolation film on the transparent lampshade if any before using;
4. Keep the device away from fire, water and moist places in order to avoid explosion, leakage, moisture;
5. Any severe shock or smash to the light is not recommended;
6. No one expect professional technician should attempt to disassemble to the light in order to avoid damaging the light.
){kind=link}